Shutoff / Control Motors
Boom Control motors are 25 RPM, 0.6 second shutoff valves for 12 VDC systems. Available with E or EC series motors with DIN or CABLE versions. E type motors work with DPDT (double pole, double throw) switch. EC type motors work with simple SPST (single pole, single throw) on/off switch and are compatible with all sprayer controls.
Current draw less than 2 amps (1.7 amps at 40 in-lbs.). Electrical connectors can be ordered with a standard number.
Note: 2-way control motors can be rotated 180° to change the cable outlet direction on the valve. There is also an adapter to rotate motors 90°, contact your local representative for more information.
Regulating Motors
Choosing the proper regulating motor speed is important to maximizing the sprayer’s performance. Three speeds are offered at this time: 1 RPM, 3 RPM and 6 RPM. The 1 RPM speed is used mostly in manual systems; it is too slow for automated rate control. The other two speeds are used in automated systems. The 3 RPM is the most popular and opens the valve to the maximum flow in about 6 seconds for the RL valve and about 10 seconds for the PR valves. The 6 RPM motor cuts those times in half.
Cut-Away Information
- An internal fuse protects the valve and your electrical system, and it resets automatically by disconnecting power to the motor for 20 seconds.
- Direct coupled visual indicator to verify position/operation.
- Cover fits snugly over the motor cavity to reduce air space and eliminate condensation. It’s sealed and sonically welded to comply with the IP67 rating for submersion under water.
- Permanent etched marking with complete motor number and date coded (year, date, month).
- Double-wall construction of the gearbox increases strength and maintains permanent lubrication of the durable, all-metal gears.
- Motor head assembly is easily detached by pulling a retaining pin allowing manual operation or easy replacement of the motor.
- Available for either positive or negative switched electrical systems with a sturdy, built-in double sealed grommet and flat gasket that seals the DIN connector versions. Motor and DIN cables are made of polyurethane.
DIN and Cable Electrical Connector
DIN and motor cables are made of polyurethane and are pressure extruded creating a round cable for improved sealing. Polyurethane has twice the strength and three times the tear and abrasion resistance of PVC. Motor cables include over-molded plugs that seal off the ends of cables and wires to prevent seepage. Conductor insulation uses familiar color coding of red, white and black. DIN cable connectors are constructed for a special over molded elastomeric material that does not require a flat gasket to be sealed. The center screw is made of stainless steel.
|
DIN Cable |
Cable |
|
38082-05 |
1.5 ft. (0.5 meter) DIN cable |
|
38082-15 |
5 ft. (1.5 meter) DIN cable |
|
38082-30 |
10 ft. (3 meter) DIN cable |
|
38082-60 |
20 ft. (6 meter) DIN cable |
B Style Electirc Motor Information (110 kb)
